Canon PIXMA E470 supports Wifi and Wireless Direct printing. Both are two different ways of using the printer. I will explain to you in detail what these two options are and how to use them. If you are looking for how to reset Canon E470 wifi settings or change PIXMA E470 Wifi settings or how to connect Canon E470 to your Wireless router then keep reading. There are some basic things you will have to follow before we start setting up the printer.
You can connect Canon PIXMA E470 to Wifi Router and shared it on the network. All PC or Laptops on the same LAN/Wifi network can access and use the printer. The setup is a little tricky but easy. I prefer first to reset the printer settings so that there won’t be any issue while connecting the same. The easiest way to connect Canon E470 to a router is via a PC. Follow the steps below and there is also a video of the setup. The best recommended is to reset the printer settings before switching its wifi connection. If you have a brand new printer then skip this step and check the Wifi settings section below.
Press and hold the Stop button. Wait until the Alarm light flashes 19 times. Leave the stop button and done. The power light will blink a few times confirming Canon E470 factory settings are restored. This is to flush down all the previous settings and restore the printer’s official settings. It became easier to set up the printer on the Wi-Fi after this. If you have purchased a new printer then skip this step.
We will now proceed with Canon Pixma E470 Wifi settings. If you are connecting this printer for the first time or want to change its Wifi settings then here is the simplest way. I will share a direct method of connecting Pixma E470 to the router. But first, if you face any error do not forget to reset your printer to default settings.
Before we start you will have to note down the following things. Router SSID – Default Wifi Name and Router Password – Your Wifi Password. Also, you will need an active internet connection.
That’s it the printer is properly installed and connected to the router. You can follow the below steps to add the printer on any PC or Laptop connected to the same router via Wifi or LAN.
You have to follow the add printer step to add Pixma E470 to your PC. Sharing settings can be modified from the web panel.
This is how you can install Canon Pixma E470 on Windows 10. You can share this printer on the network with any system. The same goes for Scanner. Just launch the Windows Scan app to use it once the printer is installed. You can also use Canon Inkjet mobile apps to use the printer. Read our guide on Canon Pixma E470 Wifi-Direct guide to print or scan on Pixma E470 using an Android or iOS Smartphone.
The history of the UK is interconnected with the tale of bookmaking, reflecting the rich…
What are Arrowhead Game Studios plan to release Helldivers 2 on Xbox? Here are some…
Here is the formula on how to find Median of a dataset in Microsoft Excel.
Here's the list of all the FF7 Rebirth trophies including the Platinum trophy.
Here's how to redeem all the demo rewards and bonuses in Final Fantasy 7 Rebirth.
Here's where you can find out how many chapters are there in Final Fantasy 7…